HOME > PRODUCT > Mechanical Tester > Mechanical Shock Test System > details
Product introduction
Products are inevitably affected by impact, bump, free fall, tumbling, etc during production, transportation, loading and unloading as well as during the use of the products. All of these are transient excitation on the object, causing the object to produce mechanical characteristics of high speed, acceleration, strain rate, etc in instantly. It is completely different from objects in static load which cause problem to the object in terms of structural strength and stability and sometimes the object may fall. Therefore, it is necessary to study the effect of impact and reproduce the shock environment, to assess the structural strength and performance of the object under shock environment.
The application of shock test
Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging. Regardless whether you want to do a boundary assessment on complete product breakage, industrial standard shock
pulse or company’s internal standards, we can provide the most advanced shock test system to meet your application requirements.Suitable shock test for aviation, aerospace, marine, military, consumer electronics, automobiles, home appliance and display devices.By selecting different waveform generator can perform: half sinusoidal wave, saw-tooth wave, trapezoidal wave.
Features
- Convenient touch screen operation;
- Complete safety protection system;
- Utilize pneumohydraulic booster and braking system to prevent multiple impact;
- With air spring shock absorber and hydraulic shock damping mechanism, there will be no influence of impact on the surrounding and no foundation requirement.
Specifications
|
System Model |
ZH-SKT30 |
ZH-SKT50 |
ZH-SKT100 |
ZH-SKT200 |
ZH-SKT300 |
ZH-SKT600 |
ZH-SKT1000 |
|
|
Table Size（cm） |
40×40 |
50×60 |
70×80 |
100×100 |
120×120 |
150×150 |
200×200 |
|
|
Max（Kg） Payload |
30 |
50 |
100 |
200 |
300 |
600 |
1000 |
|
|
Max. Acceleration（g） |
Half Sine |
600 |
600 |
600 |
500 |
500 |
300 |
300 |
|
Saw Tooth |
100 |
100 |
100 |
100 |
100 |
100 |
100 |
|
|
Square |
- |
150 |
150 |
150 |
100 |
100 |
100 |
|
|
Pulse Duration（Ms） |
Half Sine |
30-0.5 |
30-1 |
30-1 |
30-2 |
20-3 |
20-3 |
20-3 |
|
Saw Tooth |
18-6 |
18-6 |
18-6 |
18-6 |
18-6 |
18-6 |
18-6 |
|
|
Square |
- |
30-6 |
30-6 |
30-6 |
30-6 |
30-6 |
30-6 |
|
|
Machine Dimension（cm） |
120×105×245 |
120×105×245 |
130×120×260 |
150×130×260 |
200×160×300 |
230×180×310 |
250×250×310 |
|
|
Controller Cabinet Dimension（cm） |
W55*D50*H80 |
|||||||
|
Machine Weight(Kg) |
1900 |
2000 |
3200 |
4200 |
8500 |
15500 |
21500 |
|
|
Power And Air Supply |
3Ф AC380V 50/60Hz Compressed air 0.5~0.8MPa |
|||||||
|
Standards |
GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F IEC-68-2-27 MIL-STD-883E MIL-STD-810F ISTA UL |
|||||||
